SuperOP 2011 Event & TIP

IMTC SuperOp! 2011, premier annual Interoperability Testing event, will take place in Kona, Hawaii, during the week of May 16-20.
During the event, IMTC members will get together to test various IP Video communications systems and technologies ranging from SIP and H.323 to VoLTE and IMS. During this event, Telepresence Interoperability Protocol (TIP) implementations will be tested for the first time ever.

Registration is open at http://www.regonline.com/superopkona

IMTC official announcement can be found here (PDF).

About the writer: IMTC

The Technology Behind iPhone 4 FaceTime Protocol – Standards & Apple

Apple announcement of FaceTime, their new video telephony solution, included various standards: H.264, AAC, SIP, STUN, TURN, ICE, RTP, and SRTP. If this is the case, it would offer great start for interoperability, as the very same standards are widely used by the modern video communications solutions by majority of the vendors.

Here’s a short explanation on the role of each standard:

H.264 – one of most prominent video compression standards in use today. Used by every major and minor video communications solution today, from the mobile video to desktop to room system to Telepresence system. Has AVC (advanced video coding) and SVC (scalable video coding) profiles – AVC profile is what is widely used and interoperable today, while SVC profile holds great promise once interoperability will be established. Already used on the iPhone and other i-devices.
AAC – advanced audio coding standard. Widely used today in audio and video communications and has established interoperability. Used by iPhone and other i-devices.
SIP – Session Initiation Protocol – de-facto standard of IP Communications solutions, including both Voice and Video communications. Used by majority of video conferencing vendors, such as Cisco, Tandberg, Polycom, RADVISION and more. Also one of the core standards in 3GPP IMS ( IP Multimedia Subsystems) communications.. Highly interoperable, however, lacking dedicated definitions for IP Video Call Control – IMTC SIP Parity Activity group developed set of best common practices and use cases to improve interoperability of SIP –based video communications.
STUN, TURN and ICE – typically used together to support Firewall and NAT traversal functionality. STUN ( Session Traversal Utilities for NAT) allows to map internal IP addressed behind the NAT to the external IP addresses. TURN (Traversal Using Relay NAT) is used in rare cases where STUN doesn’t provide a solution. ICE (Interactive Connectivity Establishment) is used as an umbrella standard utilizing STUN, TURN, uPnP and others in order to find possible way to transfer the NAT and Firewall.
RTP, which stands for Real-time Transport Protocol, is used in Voice and Video over IP implementations to carry over real-time media and collecting of the statistics, such as jitter and latency, which in turn allows to implement better quality solutions. Today used by absolute majority IP voice and video vendors.
SRTP – Secure RTP, profile for secure RTP communication which supports encryption, message authentication and integrity. Widely used in both IP Video and Voice implementations.

We are looking froward for further implementations of this new technology. Things are getting very interesting in visual communication products.


More about Facetime:

  • Facetime Technical Analysis on packetstan.com - Part 1(TCP, UDP, AKAMI, STUN, SIP), Part 2 (Sip & Data Streams), Part 3 (Call Connection Initialization).
About the writer: Anatoli Levine

IMTC SuperOp! 2010 (New date)

April 26-30, 2010 – IMTC SuperOp! 2010,  IMTC premier annual Interoperability Testing event, will take place in Jesi (Ancona), Italy. During the event, IMTC members will get together to test various IP Video communications technologies, including Video-Conferencing over SIP and H.323, Packet Switch Streaming, 3G-324M mobile video-conferencing and more. Additionally, IMTC will held a Telepresence Interoperability workshop and kick-off meeting. The event is open to all IMTC members and non-members by invitation only. Additional information can be found at the registration site.

Update, the event is postponed to June 14-18:

” Dear Colleagues,

It is not an easy decision to make, but considering that the world just started very gradual recovery from the ash cloud travel disruption, IMTC SuperOp! Planning Committee decided that it will be reasonable and prudent to postpone the testing event until June 14-18. We truly believe that this is the best decision on behalf of all participants, as it will ensure that everybody will be able to safely get in and out of the event and will be able to focus on the testing and not on the travel headaches during the event. Additionally, we see this as an opportunity to may be bring additional companies to the event, especially those who couldn’t attend next week.

With this, there is a number of items to be taken care of:

  1. To simplify the logistics, all attendees will be automatically rebooked with the hotel according to the new event dates (June 14 – 18). For example, for someone who was supposed to arrive on Sunday, April 25th, the new arrival date with the hotel will be June 13. Of course the changes can be made as necessary by individual participants.
  2. We are working on making the arrangements with the hotel to securely store all of the shipped equipment at no charge. Update will be provided on this later on.
  3. We would like to encourage everyone to make new travel arrangements as soon as possible to ensure proper flights will be available.

Once again, we believe that this is the best decision for all the participants and IMTC members under current circumstances and we apologize for any inconvenience.

With best regards,

IMTC SuperOp! Planning Committee ”

Reblog this post [with Zemanta]
About the writer: Anatoli Levine

VoLTE and the IMTC

_MG_3750
Image by Richard.Asia via Flickr

One of the important aspects of an open standard is the ability to rigorously test it for interoperability. And then when you’re done testing – test yet again. It is an ongoing process that never seem to end.

Take our 3G-324M AG at the IMTC – I’ve been an active participant of this group from its inception, and that was over 5 years ago. And this year, the 3G-324M AG is going to have some more testing done – it seems like there is no rest for engineers.

So now that the GSMA has decided to go full force and work on the VoLTE specification so that operators can start rolling out all-IP mobile networks and still provide the basic services they do today, there was a missing piece in the puzzle – they have the ecosystem, but not real place to use for interoperability testing amongst the vendors implementing VoLTE.

That’s exactly where the IMTC comes into the picture [Read more...]

About the writer: Tsahi Levent-Levi