
Also Availiable as PDF. [Read more...]
VoLTE Webinar Transcribe
IMTC VoLTE Webinar Recording
The IMTC VoLTE Webinar was a great success with many viewers, questions and great presentations.
The Webinar video and presentation is now online:

Voice over LTE: Industry, Standardization and Market Realities and Perspectives Webinar
![]()
4G Networks are happening right now, delivering ever increasing bandwidth and speed to a myriad of devices all over the world. However, when it comes to voice, it is still done the “old fashion way”. Voice over LTE (VoLTE) is a set of standards (an IMS profile) and a technology which promises to bring Voice into the 21st Century as a real feature of 4G networks – but while everybody is talking about it, not everybody is “doing something about it.”
Join the group of experts from IMTC, GSMA and the communications industry to about the learn current state of VoLTE technology and its market realities and prospective. Is VoLTE ready for prime time? When will VoLTE deployment happen first? Are the equipment vendors, handset manufacturers and service providers ready to roll out VoLTE? Are the consumers ready and should they demand that VoLTE be available NOW? When are we going to see Video over LTE? Who drives VoLTE market adaption – is it an operator/vendor/industry groups push or is there a market pull from end users? What is the role of IMTC in advancing VoLTE standards and technology? If you want to get the answers for these as well as many other questions, please join IMTC VoLTE webinar on November 30th at 11:00 AM US Eastern Standard Time.
For additional details, and registration, please click here.
Where – Scopia Videoconferencing System. (Click for Call-IN Details)
Geng Wu, chief architect and director of Wireless Technology Divison at Intel.
Full list of speakers and biographies can be found here.
Step by Step Guide To Achieving Real Life Interoperability
Step by step guide – sounds promising, right? We like step by step guides, they make our lives simpler. So in the spirit of simple and beautiful world, let me present you with the step by step guide to achieving real life interoperability.
Step one – you organize SuperOp!.
Step two – you get all the engineers together to test interoperability.
Step three – testing takes place, mixed with some fun (makes people happier, so they tend to do better work). Step four – you step aside and admire the results. While on the step four, you realize that the world became a little bit more interoperable. Once you done with admiration, you start from the step one.
This is precisely what IMTC had being doing for the past 15 years, and plans to continue doing for the foreseeable future. Every year interoperability becomes a little bit better, calls are established faster and video quality is become closer and closer to the real life. You also understand that the is more and more work to do – new vendors coming in, new technologies come out of the crib and start craving for attention – therefore they should be included in the next circle.
If you just take a look at the SuperOp floor, all you see is a lot of busy people. Just by taking the look from outside, it is hard to comprehend what is going on, and why all this people (yes, engineers) are staring so intently into the myriad of computer screens and monitors. The tests are performed and results are stored in the form of the logs and notes.|
All the test result, success, failure or else strictly belong to the participants (lyrical, err – legal interlude: all the companies sign rules of engagement which strictly prohibits any public disclosure of particular test results).
So, how one can assess the level of successful interoperability if all results are kept private? Easy – this is why each SuperOp! ends with Super Connect.
What is SuperConnect? It is something which makes engineers proud. During the week, the tasting takes place, and interoperability is established for all the different systems brought to the testing room. Goal of the SuperConnect is to bring all the interoperable devices (by all means, as many as possible) into one big conference – and of course, admire the result on the big screen.
It is very easy to see if world is becoming more interoperable year after year by looking at some of the SuperConnect stats.
Here are some numbers for the SuperConnect 2011. Despite rough preparation cycle, it took less than 20 minutes from start until the finish (all devices connected) – I believe it was the fastest ever. Just so you understand the significance of this number – in the SuperOp! schedule we still allocate 3 hours to complete SuperConnect.
10 years ago, we us to start it in the morning, as 3 hours were not enough. In the SuperConnect 2011, 50 endpoints were connected, including Telepresence Systems. For the first time ever, the number of endpoints connecting over SIP was equal if not greater to the number of endpoints connected using H.323. For the first time ever, TIP was used in the SuperConnect network. For the first time ever, SuperConnect network included SBCs. Full SuperConnect video-conference was successfully streamed to the mobile device using packet switch streaming technologies. In parallel to all the video testing work, for the first time ever, VoLTE (Voice over LTE) testing was performed over live LTE network.
Did I manage to convince you that the world is a little bit more interoperable place now? I truly believe that it is, and I believe that all the companies and engineers who attended the event have every reason to be proud. Video is finally becoming just a routine (this is good!) and IMTC played and will continue to play the major role in empowering people to communicate any time, any place and on any device.
Are we done? Is it the time to rest on laurels? We are still very far from it.
There is a lot of work to be done, and this work will only be as successful as the companies’ participation in it. If your company is not a member, you should really ask yourself why. You have have to join in, as making the world more interoperable (and, therefore, better?) is a collective (and fun!) effort. The interoperable world awaits … You.
IMTC SuperOP! 2011 – VoLTE, TIP, QoE & SVC
- VoLTE Testings, will be conducted during the IMTC SuperOP! event that will take place in Kona, Hawaii, during the week of May 16th-20th, 2011. During the event, tests will be focused on terminals and core network. This makes the IMTC SuperOp! 2011 testing event unique, and one of the few places to actually accomplish this level of engineer to engineer interoperability testing. IMTC is inviting all terminal companies to participate including ST-Ericsson, Nokia, Samsung, Sharp, LG, RIM and others, as well as Operators with interest in VoLTE. Contact Anatoli Levin (alevine@radvision.com) orPaul Ritchie (pritchie@inventures.com) for additional details.
- Open TIP Testing at SuperOp – Telepresence Interoperability Protocol testing will be a key focus during the SuperOP! 2011 event.
IMTC is inviting all interested parties, both members and non-members alike, to participate in this event’s engineering focused testing.
For more information about TIP testing at SuperOP! Event, press here (pdf). - IMTC H264 SVC & QoE Workshop - IMTC will be holding a SVC & QoE Workshop during our SuperOp!, May 16-20. This is an open call to all IMTC members to participate, AND, submit proposals for speaker slots and presentations. This workshop, organized as part of IMTC SuperOp! 2011, is intended to bring together experts in the field to discuss what SVC means to the videoconferencing and UC industries, what is missing in terms of standards support, and what steps should the industry take to ensure interoperability. If you would like a time-slot on the agenda, Speaker proposals should be sent to our IMTC Service desk at Help@IMTC.org by April 4, 2011, and include the speaker’s name, affiliation, and presentation title.



